EasyBand® Bending Insensitive Single-mode Fibre
Classification:
EasyBand® bending insensitive single-mode fibre encompasses all the features of FullBand® fibre and provides good resistance to maro-bending.
Cotnact：
Details Introduction
EasyBand® bending insensitive single-mode fibre encompasses all the features of FullBand® fibre and provides good resistance to maro-bending. It has low macro-bending sensitivity and low water-peak level. It is comprehensively optimized for use in O-E-S-C-L band (1260 -1625 nm). It offers good resistance to additional losses due to low macro-bending in the 1625 nm wavelength region. This not only supports L-band applications but also allows for easy installation without excessive care when storing the fibre, for example, in splicing cassettes. For cable use inside buildings, the fibre supports installation with small cable bending radii and compact organizers.
Applications
• Short pitch cables for special application
• High performance optical network operating in O-E-S-C-L band
• High speed optical routes in buildings (FTTx)
• Cables with low bending requirements
Product standards
YOFC EasyBand® bending insensitive single mode fibre meets or exceeds the ITU-T Recommendation G.652.D/G.657.A1 including the IEC 60793-2-50 type B1.3/B6.a1 Optical Fibre Specification.
Characteristics
• Low attenuation satisfying the operation demand in O-E-S-C-L band
• Good bending loss resistance at short radius bends
• Low bending loss for highly demanding cable designs including ribbons
• Low PMD satisfying high bit-rate and long distance transmission requirements
• Accurate geometrical parameters that insure low splicing loss and high splicing efficiency
Parameter
|
Characteristics |
Conditions |
Specified values |
||
|
Optical Characteristics |
||||
|
Attenuation |
1310nm |
≤0.35 |
||
|
|
1383nm(after H2-aging) |
≤0.35 |
||
|
|
1460nm |
≤0.25 |
||
|
|
1550nm |
≤0.21 |
||
|
|
1625nm |
≤0.23 |
||
|
Attenuation vs. Wavelength Max. α difference |
1285-1330nm, in reference to 1310nm |
≤0.03 |
||
|
|
1525-1575nm, in reference to 1550nm |
≤0.02 |
||
|
Dispersion Coefficient |
1285-1340nm |
-3.5 to 3.5 |
||
|
|
1550nm |
≤18 |
||
|
|
1625nm |
≤22 |
||
|
Zero Dispersion Wavelength(λ0) |
-- |
1300-1324 |
||
|
Zero Dispersion Slope(S0) |
-- |
≤0.092 |
||
|
Typical Value |
-- |
0.086 |
||
|
PMD |
Maximum Individual Fibre |
-- |
≤0.1 |
|
|
|
Link Design Value（M=20，Q=0.01%) |
-- |
≤0.06 |
|
|
|
Typical Value |
-- |
0.04 |
|
|
Cable Cutoff Wavelength (λCC) |
-- |
≤1260 |
||
|
Mode Field Diameter（MFD） |
1310nm |
8.4-9.2 |
||
|
|
1550nm |
9.3-10.3 |
||
|
Effective Group Index of Refraction（Neff ） |
1310nm |
1.466 |
||
|
|
1550nm |
1.467 |
||
|
Point Discontinuities |
1310nm |
≤0.05 |
||
|
|
1550nm |
≤0.05 |
||
|
Geometrical Characteristics |
||||
|
Cladding Diameter |
-- |
125.0±0.7 |
||
|
Cladding Non-Circularity |
-- |
≤0.7 |
||
|
Coating Diameter |
-- |
235-245 |
||
|
Coating-Cladding Concentricity Error |
-- |
≤12.0 |
||
|
Coating Non-Circularity |
-- |
≤6.0 |
||
|
Core-Cladding Concentricity Error |
-- |
≤0.5 |
||
|
Curl(radius) |
-- |
≥4 |
||
|
Delivery Length |
-- |
Up to 50.4 |
||
|
Environmental Characteristics |
1310nm, 1550nm & 1625nm |
|||
|
Temperature Dependence Induced Attenuation |
-60℃ to +85℃ |
≤0.05 |
||
|
Temperature-Humidity Cycling Induced Attenuation |
-10°C to +85°C, 98% RH |
≤0.05 |
||
|
Watersoak Dependence Induced Attenuation |
23°C, for 30 days |
≤0.05 |
||
|
Damp Heat Dependence Induced Attenuation |
85°C and 85% RH, for 30 days |
≤0.05 |
||
|
Dry Heat Aging |
85℃, for 30 days |
≤0.05 |
||
|
Mechanical Specification |
||||
|
Proof Test |
-- |
≥9.0 |
||
|
|
-- |
≥1.0 |
||
|
|
-- |
≥100 |
||
|
|
-- |
-- |
||
|
Macro-bend Induced Loss |
10 Turns Around a Mandrel of 15 mm Radius |
1550nm |
≤0.25 |
|
|
|
10 Turns Around a Mandrel of 15 mm Radius |
1625nm |
≤1.0 |
|
|
|
1 Turn Around a Mandrel of 10 mm Radius |
1550nm |
≤0.75 |
|
|
|
1 Turn Around a Mandrel of 10 mm Radius |
1625nm |
≤1.5 |
|
|
Coating Strip Force |
typical average force |
1.5 |
||
|
|
peak force |
1.3-8.9 |
||
|
Dynamic Fatigue Parameter (nd) |
-- |
≥20 |
||
Documents
Previous Page
Keyword:
EasyBand® Bending Insensitive Single-mode Fibre
Production
Related Products
Message consultation
We will surprise you with a gift as soon as we receive your message.
Contact Information
Add: 9th Floor, Building B, Optics Valley Times Square, No. 111 Guanshan Avenue, Donghu New Technology Development Zone, Wuhan
