HTF
High Temperature Fibre
Classification:
Data transmission, high power laser delivery and sensors require special reliability at demanding environment conditions. A special challenge is the changing temperature, extreme heat or extreme cold conditions for a fibre when used as fire detector, temperature sensor or for data transmission in certain special industrial applications. We offers HTF for medium and high temperature environment requirements with the temperature up to 300 ℃.
Cotnact：
Details Introduction
Applications
• Mining industry
• Aerospace
• Oil/gas industry
• Medical
Characteristics
• Excellent high temperature stability
• Excellent optical and geometrical properties
• Customized profile and sizes
• Typical Products
1. Special Polymer Coated High Temperature Fibre
Operation temperature: long term, -65 ℃ to +150 ℃ ;intermittent, up to 200 ℃
Cladding diameter range from 200μm to 660μm, customized NA and coating diameter
• Coating diameter (125μm cladding fibres): 245 ± 10μm
• Coating diameter (200 - 660μm cladding fibres): NA: Customized
2. Optimized Polyimide Coated High Temperature Fibre
Operation temperature: in long term, -65 ℃ to +300 ℃ ; intermittent, up to 350 ℃
Coating diameter (125μm cladding fibres): 155 ± 5μm
Coating diameter ( ≤ 220μm cladding fibres): NA: Customized
Parameter
Specifications-1
|
Fibre Type |
HT 9/125-14/250(150) |
HT 9/125-14/155(300) |
|
Part No. |
HT1210-A |
HT1510-B |
|
Optical Properties |
||
|
Mode Field Diameter@1310nm (μm) |
9.2 ± 0.4 |
9.2 ± 0.4 |
|
Mode Field Diameter@1550nm (μm) |
10.4 ± 0.8 |
10.4 ± 0.8 |
|
Fibre Cut-off Wavelength (nm) |
≤ 1300 |
≤ 1300 |
|
Attenuation@1310nm (dB/km) |
≤ 0.4 |
≤ 1.0 |
|
Attenuation@1550nm (dB/km) |
≤ 0.25 |
≤ 0.8 |
|
Geometrical Properties |
||
|
Cladding Diameter (μm) |
125.0 ± 1.0 |
125.0 ± 2.0 |
|
Coating Diameter (μm) |
245.0 ± 10.0 |
155.0 ± 5.0 |
|
Cladding Non-circularity (%) |
≤ 1.0 |
≤ 1.0 |
|
Core/Cladding Concentricity Error (μm) |
≤ 0.8 |
≤ 0.8 |
|
Coating/ Cladding Concentricity (μm) |
≤ 12.0 |
-- |
|
Mechanical Properties |
||
|
Proof Test (kpsi) |
100 |
75 |
|
Operating Temperature (℃) |
-65 to +150 Short Term +200 |
-65 to +300 Short Term +350 |
|
Coating Type |
Special Polymer |
Polyimide |
Specifications-2
|
Fibre Type |
HTG 50/125- |
HTG 62.5/125- |
HT 50/125- |
HT 62.5/125- |
|
Part No. |
HT2312-B |
HT2215-A |
HT2512-B |
HT2515-B |
|
Optical Properties |
||||
|
Attenuation@850 nm (dB/km)* |
≤ 3.0 |
≤ 3.0 |
≤ 4.0 |
≤ 4.0 |
|
Attenuation@1300 nm (dB/km)* |
≤ 1.0 |
≤ 1.0 |
≤ 2.0 |
≤ 2.0 |
|
Bandwidth@850 (MHz·km) |
≥ 150 |
≥ 150 |
≥ 150 |
≥ 150 |
|
Bandwidth@1300nm (MHz·km) |
≥ 300 |
≥ 300 |
≥ 300 |
≥ 300 |
|
NA |
0.200 ± 0.015 |
0.275 ± 0.015 |
0.200 ± 0.015 |
0.275 ± 0.015 |
|
Geometrical Properties |
||||
|
Core Diameter (μm) |
50.0 ± 2.5 |
62.5 ± 2.5 |
50.0 ± 3.0 |
62.5 ± 3.0 |
|
Cladding Diameter (μm) |
125.0 ± 1.0 |
125.0 ± 1.0 |
125.0 ± 2.0 |
125.0 ± 2.0 |
|
Coating Diameter (μm) |
245.0 ± 10.0 |
245.0 ± 10.0 |
155.0 ± 5.0 |
155.0 ± 5.0 |
|
Cladding Non-circularity (%) |
≤ 1 |
≤ 1 |
≤ 1 |
≤ 1 |
|
Core/Cladding Concentricity (μm) |
≤ 1.5 |
≤ 1.5 |
≤ 1.5 |
≤ 1.5 |
|
Cladding/Coating Concentricity (μm) |
≤ 12.0 |
≤ 12.0 |
-- |
-- |
|
Mechanical Properties |
||||
|
Proof Test (kpsi) |
100 |
100 |
75 |
75 |
|
Operating Temperature (℃) |
-65 to +150 Short term +200 |
-65 to +300 Short term +350 |
||
|
Coating Type |
Special Polymer |
Polyimide |
||
• For attenuation measurement, the fibre is wound with near zero tension onto a greater than 36cm diameter measurement spool.
• Customized products are available upon customer request, such as different geometrical parameters, bandwidth, NA, higher proof test level, etc.
Documents
Previous Page
Next Page
Keyword:
High Temperature Fibre
Production
Related Products
Message consultation
We will surprise you with a gift as soon as we receive your message.
Contact Information
Add: 9th Floor, Building B, Optics Valley Times Square, No. 111 Guanshan Avenue, Donghu New Technology Development Zone, Wuhan
